Help needed

[Impulse986]

the plug was normal after i spent about 4 hours the other night trying to diagnose this thing i havent checked it today

 

[Impulse986]

yes i have removed the pilot and main jets an cleaned them , this being on the carb that runs in the bike normally , i removed my 04 carb an put it in the 95 to help narrow down the problem , which it did not as it still does the samething regardless of carb , i have a 250 main jet im going to go put in the 95 carb an see what she does i should be back in about 15 minutes

 

[yb200]

if that carb off you other bike is jetted for a pipe its gunna be to rich of a main

 

[mr_3_0_5]

the reed is there a gap?
between the pedals. like should there be a one piece pedal on that cage i cant tell ..
nevermind the silver was throwing me off..

 

[mr_3_0_5]

the carb in the video , is the carb off my running bike ,choke has no effect what so ever on it

but in the video it was running with the choke on..

 

[Impulse986]

the carb that came with the bike has a 230 main jet in it

 

[yb200]

put the air lid back on then

 

[mr_3_0_5]

whats happens when your reving it like that with the choke off?

 

[Impulse986]

but in the video it was running with the choke on..

and it was also running with the choke off , neither of which affected it

 

[Impulse986]

im gonna go put the carb back on with the airbox lid , so its not the reeds? secondly what if i were to take the pipe off , possible it clogged stoping airflow?

 

[mr_3_0_5]

well it wont run right with the choke on.

 

[mr_3_0_5]

airscrew at? how many turns now and while your trying to rev it. turn the screw a 1/4 at a time and see if you can get to rev clean.

 

[Impulse986]

airscrew at? how many turns now and while your trying to rev it. turn the screw a 1/4 at a time and see if you can get to rev clean.

i tried that the other night an got no were , i just put it all back the way i got it , put gas in the carb kicked it and started right up , had choke on revving it , took choke off it died

 

[yb200]

try putting the airbox lid back on

 

[Impulse986]

air screw at 1 1/2 turns did half turn an backed it out the other night an it did nothing , any chance that if the exhaust were clogged it would cause this to happen?

 

[yb200]

its got to be a carb issue its either not getting enough fuel or to much

 

[Impulse986]

when its cold i can kick it all day and it doesnt start , with a little gas in the carb kick right over and will stay running once its warm

 

[Impulse986]

are there powerband valves?

 

[fioz600r]

No a blaster doesnt have a powervalve if that is what you mean.

 

[yb200]

maybe your pilot jet is plugged.....obveously <--spell its not getting gas if it starts when you dump gas in the carb