HELP! me please

[Jay]

your right the piston is in backwards. Take the circlips out of the piston and wrist pin and turn the piston around 180 degrees and it should run great.

Yeah but it maybe burned up from running it that way,turn it the 180 maybe u will be fin i hope.

 

[ATrain666]

you never know without trying it. I would get a new top end kit to replace it just incase it didn't work. If it does work sell the kit on here or on ebay. sombody is always looking for one for a spare or to rebuild.

 

[PUDDKILLER]

THANK YOU GUYS..... i will turn it tommrow . i will let you guys know how it go's. you guys have bin vary helpful.

 

[Jay]

THANK YOU GUYS..... i will turn it tommrow . i will let you guys know how it go's. you guys have bin vary helpful.

Well do i earn a rep point?

 

[ATrain666]

ill give you one for catching that. i couldnt believe it when i saw it. rep point to you.

 

[PUDDKILLER]

yes you do! ill give some rep

 

[darealblaster]

i knew something was up with the piston but i didnt noticed the arrow!! nice eye man!! lol rep given!

 

[Jay]

Thanks to u all but i didn't c the crow the in take ports on the piston r on Th wrong side there should be a arrow on the top that point to the exhaust side.

 

[custom2stroke]

one thing too i noticed is is there an actual base gasket on it? looks to me somebody used silicone sealer instead. I would purchase a top end gasket set to make sure everything is sealed good when putting back together.

 

[PUDDKILLER]

ok i turned it around and it starts good but now its idling high. how do i turn it down? there's no slack in the cable.

 

[specialized7]

still got the tors?
try turning the screw on the top, if its hard to turn just give her some muscle
turn it <--- way

 

[PUDDKILLER]

yes i do . can i just unhook it?

 

[Jay]

ok i turned it around and it starts good but now its idling high. how do i turn it down? there's no slack in the cable.

sounds like u have a air leak. did u use new gaskits?

 

[PUDDKILLER]

ok it runs like a bat out of hell. a big thanks to all who help. i live in ohio so if you what to ride just let me know. the idle problem was fix by turning the cable. i do need some parts like a front bumper, a back skid plate. if you have, and want to sale it just pm me . thanks to all who helped.

 

[Cmh156]

ok it runs like a bat out of hell. a big thanks to all who help. i live in ohio so if you what to ride just let me know. the idle problem was fix by turning the cable. i do need some parts like a front bumper, a back skid plate. if you have, and want to sale it just pm me . thanks to all who helped.

Were in ohio? Im in youngstown,and got parts for sale.

 

[PUDDKILLER]

i am from columbus, hey i run it up the street and when i got to 4th gear it started to bog down /or cut out for a sec.at full throttle. maybe my power band is bad?

 

[Cmh156]

i am from columbus, hey i run it up the street and when i got to 4th gear it started to bog down /or cut out for a sec.at full throttle. maybe my power band is bad?

There are no powerbands,its a characteristic of 2 strokes. Check your reeds? Clean the carb out really good,the top end still good? Getting enough gas? Check to see if the petcoc is plugged up.

 

[PUDDKILLER]

reed-good, carb-good, top end-ok, gas-94oct. petcoc?????-what is this?
some bud's and i are going riding this sunday. so i will test it out.

 

[blasterboy91]

dirty filter...

 

[xmous3yx]

r u running an open airbox? cuz mine bogs at 4th full throttle with air box lid off.