help assistance needed

[Ja3 Byrd]

I need help.getting my blaster running i changed the piston due to rings stuck on exhaust side from running with out exhaust on so changed piston now it will start but once. Hit throttle will cut out but have to hit throttle to start it need help runing the tors screw and the carb screw

 

[joeak47]

You were riding your blaster around without the exhaust on??? Why?

 

[tbrooks]

I think you got more problems than that. What kinda damage did that do to the cylinder? Whats your compression at?

 

[Ja3 Byrd]

First time owner had problem with the xhaust filled with gas and was just tryin gt it tp.start i dumped the gas out it started but i fixed tht problem swaped my piston out. Now it will start but i have to hit throtrle to start it but after its started if hit throttle it die i think its the carb my reeds are good the new piston is good no compression tester but the old piston was why i didnt have compression

 

[tbrooks]

If you needed a new piston the bore should have been checked as well. There is no way to know you have good compression without a tester. If the exhaust filled with fuel sounds like you have a float level issue.

 

[Ja3 Byrd]

It hasnt jappend again i changed the pston in head jug all off another motor but the old cylinders mot scratched or anything but the new piston wit rings didnt fit in old cylinder so i use the other one it will bark but wont stay started i got new spark plug thinkin now gas not mixed correct