Help asap please

[Jhabeeb]

Just finished putting my quad back together and my quad will shift when you pull the shifter but the clutch wont engage when i pull the clutch cable its way to easy to pull it way easier than it should be..anyone have any idea whats goin on?? Thanks in advance

 

[Awk08]

did you align the 2 dots on the inner basket and pressure plate ???
is the ball bearing in between the 2 actuator rods ????
is the adjusting rod adjusted correctly, actuator arm pointing at the notch in the case, turn the rod in till it makes contact then backed off a 1/2 turn, then locktite on the jamb nut ????

heres some pics, scroll down the page for the "2 dots" pic .................

http://www.blasterforum.com/do-yourself-20/m-clutch-basket-install-40531/

 

[jlsparky7]

He pretty much summed up the possible causes... I have a clutch assembly vid on my YouTube page if u wanna check it out...

 

[Jhabeeb]

Hey just wanted to let u guys kno i figured it out the push rod just wasnt far enough in ha stupid mistake i was just so pumped to finaly get it goin after its been down for a month or two thanks you guys for your helP very appreciated

 

[jlsparky7]

Welcome give ur home boy up there some rep ^^^