Haulers, 240 kit, carb

[LoSeR]

1. I have a set of 7 paddle haulers on 10" rims. Like new. I used these on my ported blaster and I spanked every other Blaster I came across!! 7 paddles are perfect for the Blaster. $140 shipped.

2. Hollywood productions 240 cylinder fully ported with worm holes. Comes with bore matched swirl mod head. Set up for race fuel. I ran dead even with a piped tuned 250R 3 wheeler with this cylinder! And I had 18" motocross tires on it. The porting makes my Banshee porting look weak (visually).
Needs bore, piston. Still has several bores left. $180 shipped.

3. Keihin 35mm carb w/ K&N pod filter. $150 shipped.

 

[LoSeR]

:-D TTTT

 

[the banshee man]

You have any pics?

 

[LoSeR]

You have any pics?

Yes I will post some up a little later on today. Thanks for asking.

 

[LoSeR]

Here's a few pics

http://i270.photobucket.com/albums/jj108/meganblynn/100_1311.jpg

http://i270.photobucket.com/albums/jj108/meganblynn/100_1314.jpg

http://i270.photobucket.com/albums/jj108/meganblynn/100_1316.jpg

http://i270.photobucket.com/albums/jj108/meganblynn/100_1318.jpg

 

[quam]

hmmm....will that carb fit onto the stock intake manifold and the stock airbox? and how is it jetted? setup for the blaster, w/ slide size, emulsion tube, etc?

 

[LoSeR]

hmmm....will that carb fit onto the stock intake manifold and the stock airbox? and how is it jetted? setup for the blaster, w/ slide size, emulsion tube, etc?

It will not fit in the stock manifold. It is jetted for my Banshee (I got new 39mm's), but it should be close. Comes with slide, and K&N filter. It should fit on your stock throttle cable, would have to fabricate a rubber hose like a radiator hose to adapt stock airbox. Oh yeah, the K&N is a pod type filter, it attaches directly to the carm. You just need at least a 33-35mm intake manifold to use.

 

[LoSeR]

Bump Bump Bump

 

[LoSeR]

Bummp

 

[droppedmazda]

whats the roll out on them haulers

 

[Mrbrocco]

would those haulers fit stock hubs? if so ill give you 90 plus the shipping to 18080

 

[LoSeR]

Not sure the roll out on haulers. They will fit stock hubs. Whoever can put the money in my paypal account first will get them.
Thanxx, Marcus

 

[LoSeR]

Carb sold!

 

[Mrbrocco]

whats your paypal and is 90 plus shipping what you want?

 

[LoSeR]

bumpp

 

[LoSeR]

El bumpo

 

[LoSeR]

1. I have a set of 7 paddle haulers on 10" rims. Like new. I used these on my ported blaster and I spanked every other Blaster I came across!! 7 paddles are perfect for the Blaster. $140 shipped.

2. Hollywood productions 240 cylinder fully ported with worm holes. Comes with bore matched swirl mod head. Set up for race fuel. I ran dead even with a piped tuned 250R 3 wheeler with this cylinder! And I had 18" motocross tires on it. The porting makes my Banshee porting look weak (visually).
Needs bore, piston. Still has several bores left. $180 shipped.

3. Keihin 35mm carb w/ K&N pod filter. $150 shipped.

May accept trades for car audio equipment.

 

[Mrbrocco]

ill take the haulers what yor paypal?

 

[Mrbrocco]

140 shipped for haulers...is my offer..

 

[cirame1]

u still have 240 kit ill take it if u do... get back to me