Has anybody replaced the oil injection lines?

[99blasterzach]

I would like to replace the oil injection lines one my blaster because they are all cracked up. And blab blah blah I know that it MIGHT fail one day and that a block off kit is oil 32$ but still I like it....
So if anybody has ever replaced there lines tell me about it and also what is the size/ length needed.
Ps I like the oil injection

 

[joeak47]

I like the oil injection too. All of ours on this end have worked flawlessly since new. Two of them are high compression ported engines.
My advice would be to order the replacement "Factory OEM" oil lines.
They are inexpensive and fit like a glove.

 

[99blasterzach]

I like the oil injection too. All of ours on this end have worked flawlessly since new. Two of them are high compression ported engines.
My advice would be to order the replacement "Factory OEM" oil lines.
They are inexpensive and fit like a glove.

Right I have looked around and I can not find any oem or anything saying what size or where u can get them from if there's a Yamaha part number that would be gr8t

 

[cwazyduck]

http://partsfinder.onlinemicrofiche.com/yamahagenuineparts/showmodel.asp?Type=13&make=yamahaatv&a=54&b=25&c=0&d=1992 BLASTER YFS200D OIL TANK

90445-090F6-00*
This the one you looking for?

http://www.bikebandit.com/oem-parts/1992-yamaha-blaster-200-yfs200d/o/m146526#sch515184

90445-092K1-00
Take your pick.

 

[99blasterzach]

http://partsfinder.onlinemicrofiche.com/yamahagenuineparts/showmodel.asp?Type=13&make=yamahaatv&a=54&b=25&c=0&d=1992 BLASTER YFS200D OIL TANK

90445-090F6-00*
This the one you looking for?

http://www.bikebandit.com/oem-parts/1992-yamaha-blaster-200-yfs200d/o/m146526#sch515184

90445-092K1-00
Take your pick.

Looks like that's the one

 

[99blasterzach]

Looks like that's the one

Nowhere both of them for the oil
To get to the pump/ to the carb?
Because if I'm replacing one I would
Do the outher to