got the yz 125

liljatownboy

New Member
Feb 24, 2008
1,518
8
0
32
forsyth county, GA
ok so its a done deal got it today. so listne to this these idiot redneck was like its cold-nature and i swear the kid kicked it a hundred times and he is like im getting gas to it. true but then after i ride it barley has power i look at the head and it has a freaking short weed eater plug in it that is almost coming out. it took so much gas to get into the cylinder so it could reach the plug. wow idiots. well ill get pics tomorrow of the bike had to work didnt have time today.
 
here it is i couldnt wait.

oa146d.jpg


2hmghkz.jpg
 
all it need is decals and a pressure wash it has a pro circut pipe and runs fine now that i have the right plug in

I don't know how true it is, but I read somewhere that powerwashers are bad for motors. I guess it forces water and dirt into the engine because of so much pressure which can lead to some issues...
 
only if you have the wand like 4-6inches from the motor. when you get to the motor back off a little and you will be fine. spray a little degreaser on the motor before washing. i try and warm them up first, spray the degreaser on the wash 5-10 min later when the motor is not as warm.
 
A guy that lives close to me has a 03 cr 125 that has a ton of aftrmkt stuff, only prob. the cylinder needs replated and new top end, but i could probably get it for around 500