got my oko, but i think its wrong!!!!

[2strokesmoke]

got my oko, ordered the 30mm flatslide a box turned up with a carb in it, i was chuffed to bits then i read the side of it it says on the body of the carb 24M...... i measured the front of the carb internal diameter it is around 23 mm so im guessing this isnt the right one i think the guy has sent me the 24mm, is this right or do they all have 24m written on them and im measuring the wrong bit. pics below.

http://i40.tinypic.com/169j58z.jpg

other than that the quality of the oko seems to be ok, not cheap and nasty looking like i was dreading it would be.

 

[motoman9911]

If it measures 23mm then I'd say it's probably wrong. 7mm is easy to notice.

 

[stephen12091985]

which side did u measure?im pretty sure you measure the biggest side

 

[kep3vin]

my oko 30mm says 30m and measures 29.9mm exhasust side and 45.5 intake side