got my F7 exhaust today!!!!!

[tjsdaname]

I got my F7 exhaust today I also orderd a 250 and a 260 main jet.... would these be good?????

I have stock carb, airbox lid on

 

[regal81455]

not sure...they didnt send or recommend one? the toomey takes a #310 i would think it would be pretty close...

 

[flyers42091]

The toomeys jet is kinda rich though. You may need something a little richer though, say a 270-290. Try what you got first.

 

[tjsdaname]

is the main jet the only thing I should half to replace???

 

[tjsdaname]

i got the jets today!!!


but would the main jet be the only one I need to replace/adjust

 

[Blaster_boy200]

i just changed the main jet but just check your spark plug

 

[tjsdaname]

what did you change it to?????

 

[02yamahablaster]

I have a 290 main in mine wth the Toomey setup. The 310 was way rich.

 

[01blaster_freak]

I have a 290 main in mine wth the Toomey setup. The 310 was way rich.

is that with airbox lid on or off??? aftermarket filter???

It's not really good to ask for jet sizes on here because we all live at a different elevation an in diff temps both play rolls in carb setp/jet sizes one guy might have a 310 main in his an run perfect while the other guy with the same exact setup at a diff location will have 290... best way to do it is just install your biggest jet you got an if its to rich work your way down.

 

[02yamahablaster]

Airbox lid on with holes drilled in it. It has a Uni filter.

 

[tjsdaname]

yeah the 270was way to lean... I got my bigger jets today!! I will try them out and tell you if I get it going right

 

[fbiguy007]

I got my F7 exhaust today I also orderd a 250 and a 260 main jet.... would these be good?????

I have stock carb, airbox lid on

were did you get it and how much??

 

[tjsdaname]

I got the pipe at projectblaster.com for 350$$$

and the jets at jetsrus.com