gearing
- Thread starter dre2992
- Start date
15t front sprocket, but you gotta have the motor to pull it ?
http://www.ebay.com/itm/YAMAHA-BLAS...KET-/301411066210?hash=item462d7fe162&vxp=mtr
and I think you have to do a little grinding of the stator cover inside for it to clear
you'll be faster top MPH, but it may take a few minutes to get there
http://www.ebay.com/itm/YAMAHA-BLAS...KET-/301411066210?hash=item462d7fe162&vxp=mtr
and I think you have to do a little grinding of the stator cover inside for it to clear
you'll be faster top MPH, but it may take a few minutes to get there
do they make a bigger front sprocket i have a 14t on it not and i would like to go faster
I don't understand what your getting at. motor Big enough and I'm grinding on what and what to do with the stater15t front sprocket, but you gotta have the motor to pull it ?
http://www.ebay.com/itm/YAMAHA-BLAS...KET-/301411066210?hash=item462d7fe162&vxp=mtr
and I think you have to do a little grinding of the stator cover inside for it to clear
you'll be faster top MPH, but it may take a few minutes to get there
not necessarily "big enough", but horsepower to turn that tall of gearing.
a stock blaster engine will struggle starting out to run a 15t sprocket and/or smaller rear sprocket for more top speed.
you'll get to a higher top speed, but it will take longer to get there.
and you may have to grind on the inside of the plastic stator cover where the chain rotates to get a 15t to fit
a stock blaster engine will struggle starting out to run a 15t sprocket and/or smaller rear sprocket for more top speed.
you'll get to a higher top speed, but it will take longer to get there.
and you may have to grind on the inside of the plastic stator cover where the chain rotates to get a 15t to fit
/\ /\ and when the 15 starts to wear a little and the chain bunches on over run it may damage the case!
it would be like taking off in 2nd 3 gear in a car if you can imagine that lol
alot of people i think would like to take off faster then slower
alot of people i think would like to take off faster then slower
if you travel down roads for miles and miles and miles in a straight line then change gears but i think stock is fine
