gasket ?

[heatlbj6]

should therebe a basket around this piece please help

 

[scotj77]

there is no gasket on the oil pump cover.

 

[blasterBruce]

Is it a good idea to Use gasket maker to make it seal better ?

 

[heatlbj6]

well i have a serious leak coming from the seal i took the cover off and cleaned around the edges and tighten the screws and it still leakss

 

[scotj77]

that is your oil pump for the oil injection system that is leaking. you need to either fix that leak or eleminate the oil injection all together and mix your own gas. you need to figure out why that pump is leaking and do not ride it. if it is not getting oil to the gas it will blow up in a very short ammount of time

 

[heatlbj6]

is there a video on how to do the block off kit

 

[blasterBruce]

there should be a write up on here

 

[scotj77]

is there a video on how to do the block off kit

your best bet is to order one. vitos makes them along with a few other places. much easier to order one than make one. and it comes with instructions. after this just mix your gas at a 32/1 ratio

YAMAHA BLASTER OIL INJECTION BLOCK OFF KIT | eBay

 

[Blaaster]

just mix your gas at a 32/1 ratio

And increase the main jet one size, plug chop to confirm.