Gas Pouring out of Overflow

at29st

New Member
Jun 18, 2009
12
0
0
I have major problem here. I was riding my 01 blaster that I just bought and it started to bog down and stall. I tried to start it up and it wouldnt start. I got off and looked at the carb and gas was porung out of the overflow tube. Whats the problem here?
 
you have to take the float bowl off and there is a little tab on the float that the needle rides on, you bend that up a little bit. if gas still flows out bend it alittle more
 
you might have a bad float also check to make sure it isnt full of gas, if it is you need to replace it or that needle could be bad also.........