front sprocket

[fioz600r]

Hey all I need a new front sprocket for the Blaster. What are some of you using, I was thinking of 13T.

I do mostly trail riding. With some open trail ripping.

Thanks for any help!!!!!!

 

[specialized7]

if your rear one is stock, put a 14t on the front.
13 is stock

 

[little3mil]

13t is tock thats what i use due to trail riding. I put a 14t sprocket on for like 5 mins hated it and put the stocker back on. I like rippin threw the short gears, ANYWAY you got 6 of the dam things!!

 

[rideyamaha09]

I use a 14 tooth sprocket, but it depends on what you prefer. If you like the stock gearing, stick with the 13 tooth. If you want extra speed, get a 14 tooth sprocket.

 

[Blasterdude27]

14T is were its at! 1st gear is actually useable and all through the gears power is spread out much better and it winds out nice on the top. This is with 18"s though, 20" might be a different story. I used to run the stock 21"s with a 12T front sprocket and I hated it, it topped out way too soon, I'm sure a sock 13 wouldn't be all that bad. Sprockets are cheap my best advise is try a few different set ups and see what you like the best.

 

[yb200]

i run a 14 with 20's and its kinda doggie up in 6th gear

 

[Blasterdude27]

i run a 14 with 20's and its kinda doggie up in 6th gear

What rear are you running?

 

[yb200]

stock....40


.................

 

[fioz600r]

Well I have 20 inch tires in the rear. I took a good look at the rear and it is starting to wave so I am getting front and rear sprockets now. I think I am going to stay stock and go from there.

Thanks guys

 

[little3mil]

and if you ride in deep sand like me you'll hate it, if you dont have 67hp....lol