Front Hydraulic Brake Swap

[yamaha28]

I made an effort to find something in the search feature about this but I just didn't quite find it. Maybe I missed it, maybe not.

I need some nice stopping power for my new build.
http://www.blasterforum.com/engine-13/cr250-motor-swap-blaster-42828/
So I was wondering what I need to make my 97 blaster into hydraulics. I saw something about new spindles but only for 88 and 89? I just need someone to clarify please! Thanks!

 

[xKroniK13x]

http://www.blasterforum.com/members/norman420-77/


There's your guy right there. From my understanding, his spindles will make a banshee setup bolt right up. And AWK sells a great kit for the back.

 

[blasterdemon7]

You need to get the custom spindles from norman420. He's a member on here. After you get the spindles, look for some Banshee or Warrior front brakes to bolt onto the spindles. For the back, awk08 makes a sweet GSXR rear brake setup. Not only does it work awesome but looks real cool.

 

[Awk08]

heres how i did my first set, before going dual braided lines this time around.........

http://www.blasterforum.com/do-yourself-20/low-buck-front-hydros-20811/

 

[yamaha28]

Thanks for the info everybody! I decided to go the route of fine tuning my drum brakes until I get the extra cash lying around for hydraulics. Maybe convert the rear because the cable is snapped. I hope this can help somebody else too. Thanks again!