fmf turbinecore

[03blasterbai]

88-06 Yamaha Blaster FMF Shorty Spark Turbinecore 2 Offroad Series | eBay


hi, just wandering would this silencer be worth buying and would their be much noise out of it.also would it fit a stock header

 

[88blasterman]

That perticular silencer will not fit! someone has cut the mid pipe in half but if you were to buy one that has not been cut up then yes it will fit. the sound will change a little (will become throater) but the performance will only change a little if any at all. all the power lays in the expansion chamber so if i were you id try to find a used fmf exhaust system. if you look around, you should be able to find a full system for well under $200 depending on shape. one other note, dont get a dg aka don't get. make sure when adding a pipe to rejet!! Also Make sure you dont catch the mod bug sickness!!!!!!!!!!!

 

[scotj77]

that is a piece of junk the stinger is about half as long as it should be. it would cost more to fix it than it would cost to buy a new one

 

[88blasterman]

agreed^^ its ready for the scrape metle bin! to buy a new one your only about $130 for the turbine core and about $100 for the powercore II. but agian, look for a full system!!

 

[88blasterman]

most common set up is the powercore 2 silincer with the fatty pipe