flat track?
- Thread starter 02blueblaster
- Start date
also upgrade your suspension. are you wanting to race in stock blaster calss of what? that would determine what motor mods you can do.
its stock and mod mixed into one class, but anyone have any links of what id need to make it nice and low?and wide?
well CRJ makes a lowering kit. then there are all sorts or ways to make it wider. axles, a-arms.....
well..i just need the cheapest alternatives for now/..i was looking for +3 a-arms..i dont like spacers...whats the best tires
well really its flat track. this is what i would do and it wouldnt cost that much compaired to going with everything top of the line.
diamond j w/ shock conversion Aproxx $200.00
YFZ450 Shocks all around $ depends on what deal you can find, either that or some KFX fronts and like a ltz rear. thoes are cheap
G-Force Racing axle. i have seen them for as little as $190.00 shipped on ebay
CRJ Lowering kit. Check their site, or check ebay. they have front and rear
Tires. Maxxis Razors. Cheap and reliable
really if you do it right you could be looking at well under $800.00 for everything.
diamond j w/ shock conversion Aproxx $200.00
YFZ450 Shocks all around $ depends on what deal you can find, either that or some KFX fronts and like a ltz rear. thoes are cheap
G-Force Racing axle. i have seen them for as little as $190.00 shipped on ebay
CRJ Lowering kit. Check their site, or check ebay. they have front and rear
Tires. Maxxis Razors. Cheap and reliable
really if you do it right you could be looking at well under $800.00 for everything.
im sure for about $1200.00 depending on what mods you have now you can have a decent flat track racer. i was on a flat track with a raptor 660 and i kept up to him. my blaster was pretty stock. flat track has alot to do with corners and handeling and all that.
i would say the +6. people are aleays saying that its to wide for trails, but unless you are trying to go on one way trails for dirt bikes i dont think you will have a problem. i havent yet. my blaster sits at 48" in the rear and 49" up front. it still turns tight and quick, but with out the feeling that you are gonna tip over every time.
well, i might go with the 6" front..but how do i match the rear?
also, who makes a lowering kit?
also, who makes a lowering kit?
guy do you read what i post? i aready said who could match the rear. a G-Force Racing axle
Here is a link eBay Motors: NEW adjustable width Racing axle Banshee Raptor Blaster (item 140274516878 end time Oct-18-08 10:42:33 PDT)
Im running 5" stud spacers on my rear and yet to have a problem
There are tons of lowering kits on ebay. Did yu try and look?
heres a link blaster lowering kit, eBay Motors items on eBay.com
i have heard that CRJ makes good stuff. take a look and do some research.
Here is a link eBay Motors: NEW adjustable width Racing axle Banshee Raptor Blaster (item 140274516878 end time Oct-18-08 10:42:33 PDT)
Im running 5" stud spacers on my rear and yet to have a problem
There are tons of lowering kits on ebay. Did yu try and look?
heres a link blaster lowering kit, eBay Motors items on eBay.com
i have heard that CRJ makes good stuff. take a look and do some research.
Last edited by a moderator:
Similar threads
