Did the first plug chop after my rebuild tonight & this is what it looked like running a 300 main w/needle clip fourth slot down. Time to go up a size or two!
First plug chop
- Thread starter blasterdad
- Start date
It tells you if your jetted rich or lean, you can read the sticky on it in the engine section.
Theres a first for everything
Sure glad you caught that before it was too late!
Me too! Have to remember not to burn my arm on the pipe next time though, lol.
Sweet. Glad you caught it before it was too late that would of sucked..especially after a rebuild
how did you do your chop run?
did you hold it WOT?
just asking because 300 main with a fmf seems rich but you never know every bike is diff, most people run a 260-280 with a fmf
did you hold it WOT?
just asking because 300 main with a fmf seems rich but you never know every bike is diff, most people run a 260-280 with a fmf
I did it exactly like the sticky says to, rode for about 5-10 mins, put new plug in, went through the gears, had it pinned WOT for about 15 seconds in sixth gear, killed it, pulled in the clutch, rolled to a stop, put old plug back in & rode home.
I nailed it through all the gears, gonna try a couple bigger jets, if that don't work it's leakdown test time again!
Similar threads
