well i just put my motor back together as i got it back from flotek today. and i go to start it, now i put on today a brand new carb, vforce reeds and wiseco piston. i have compression. the sparkplug is old im going to replace it but for now im using the old one. i kicked it over for about 5 minutes with no positive result
then i decided hmm maybe im a dumbass and hooked up the carb wrong, so i sprayed a shot of ether. same result.
then moved on to spark. did the ol screwdriver bridge test and im not getting spark.
now before getting my cylinder i did some electrical work but nothing that i can see affecting spark. i added the headlight socket (didnt have one when i got the quad) and i also cut a few wires, im not sure of the colors, but im almost 99% positive they were for the tail light which i dont have and the oil tank resevoir. this seems like a possibity but idk
im stumped and i want to fire this biotch up but now i cant. HELP!
then i decided hmm maybe im a dumbass and hooked up the carb wrong, so i sprayed a shot of ether. same result.
then moved on to spark. did the ol screwdriver bridge test and im not getting spark.
now before getting my cylinder i did some electrical work but nothing that i can see affecting spark. i added the headlight socket (didnt have one when i got the quad) and i also cut a few wires, im not sure of the colors, but im almost 99% positive they were for the tail light which i dont have and the oil tank resevoir. this seems like a possibity but idk
im stumped and i want to fire this biotch up but now i cant. HELP!