Exhaust System Question

[Demise4605]

So I finally got the Fatty Moto Pipe and the powercore II silencer, and I was looking at it and can anyone give me directions on how to connect the Fatty Moto to the front? with the springs and all and where they attach, thanks in advance.

 

[chriscblaster]

if know one gives you an answer before tomoro ill take some pix and stuff for you tomorow

 

[Demise4605]

Awesome. I only need a little bit of direction and I could probly figure it out. It only has one spring and I dont really see where to hook it. Or what else to do really, im new to all of this.

 

[Brent Johnvin]

oo it only has on spring on my procircit i have a top and bottom spring

 

[Demise4605]

It has the two holes for the bolts on the cap but i dont see where i can hook the spring from the cap to hold it on there, and yes it only came with one.

 

[Demise4605]

bump :[ my AIM is Semipro922 if u have any questions.

 

[Demise4605]

Bump before bed, please if anyone has any idea, :[ I'm baffled here.

 

[1130all]

i hooked mine on a fin on the cylinder and it works good .it is right in the center of it.

 

[codykeon18]

there should be a place for the spring on the pipe itself and then the spring goes to the cyl.

 

[djack12]

FMF screwed up some flanges for the blaster fatty pipes, and didnt weld a loop on for spring to attach to.. my FMF pipe was the same way. just bolt the flange on, slide the pipe over the flange, and put top bolt on that attaches the pipe to the frame, and then slipe the silencer on. hope this helps.

 

[Demise4605]

Yeah, I got it guys on the cylinder, lol, i feel so dumb, but thanks a lot