engine oil?

[coreyownz]

curious what u guys run for motoroil i just run a straight 30w

 

[98blaster+4]

take that junk out and go buy some BELRAY gear saver 80 w far as i can tell its the best . and its only 10 bucks a quart

 

[coreyownz]

for engine oil? i realy couldnt care didnt ur blaster blow up hmmm?

 

[98blaster+4]

its not just engine oil ,its your crankcase oil with your clutch in there,regular oil has friction modifiers in them that decrease clutch performance
btw why didnt you do a search????? u obviously know how,and it was my TOP end that went ,bottom end is mint.
hopefully someone else will chime in because i guess i dont know nothin

 

[coreyownz]

i could care less the oil realy is just the bottom end cause the 2 stroke oil is the engine oil

 

[blaster20001]

i run yamalube

 

[xjma]

actually the oil you put in there lubes the tranny and the clutch. the bottom end gets lubed by the pre-mix.

 

[pportera]

curious what u guys run for motoroil i just run a straight 30w

Its not motor oil, its gear and clutch oil. THe crank is lubed by the gas/oil mix going into the head.

You must buy "real" gear oil that is safe for wet clutches. Go to either dealer or aftermarket shop for some 2stroke gear oil.

 

[245stroker]

i run mtl 2 stroke tranny oil in mine. its specially designed for 2 stroke bottom ends

 

[CC&Fabb]

I run BELRAY Gear Saver on the clutch side and Maxima Castro 927 for the top end. I will never switch either one. EVER!

 

[xjma]

I run BELRAY Gear Saver on the clutch side and Maxima Castro 927 for the top end. I will never switch either one. EVER!

ever tried torco?? works great!!

 

[CC&Fabb]

No I have not tried it. I just tend to stick to things that work well for me, so thats why I used the Maxima and BELRAY

 

[pportera]

I use old motor oil out of my truck when i change its oil, its about the best you can get for a 2-strokeI:I

 

[militaryblaster]

Use BelRay 80W Gear Saver for the bottom end.