engine loping when throttle is applied

[buck119fa]

I have an 04 blaster that seems to draw too much air? When applying the throttle the engine boggs down and then starts to lope. You cant get any power from this to even begin to ride. just rebuilt the carb, replaced the choke, plug, new fuel. still can't seem to find the problem. This will run at an idle but still bogs out and lopes when you hit the throttle. ANy suggestions???

 

[Outlawed Genetics]

was it like this when you got it? any aftermarket parts on it? sounds like jetting to me

 

[buck119fa]

No all stock, ran great last year. haven't had time to use it much this year now i have this issue and Cant ride

 

[244blackblastard]

either the carb is still out of adjustment or it's your tors unit. look up tors removal in search and remove it since your all stock it might be the problem and tors causes alot of problems for people. if you remove it and it still does it then it's a carb issue most likely.

 

[25ironman]

I have the same problem on my 2004 blaster. It has to be the tors system. Does any one know how to disconect the TORS on a newer blaster?

 

[yb200]

go to DIY its in there

 

[tyler1blaster]

it sounds like good old jetting!!!

 

[yb200]

it sounds like good old jetting!!!

its all stock why would it be jetting

 

[25ironman]

check and make sure the e-brake is not sticking on the bars or the rear caliper.mine was doing the same thing. my buddy the borrowed it for got to tell me he tried the e-brake and i figured it out after working on it for two days.