Eliminate Start Switch

[deckpen]

Ok putting sons MX Blaster back together. The Blaster has no lights and I was wondering if there is a way to eliminate to eliminate the light switch and the on/off switch? I have a kill switch on the Blaster now that replaced the key so I can use that to turn the Blaster off. Help!! Thanks guys

 

[Wifesblaster]

I have a key and a dirtbike style kill switch. I can't remember if it is an open or closed switch. Here is a simple way to find out. Pull the spark plug out. Find the 2 wires that go to the off/run switch. Cut them. I believe they cannot be connected for it to spark. So leave those two wires separated and check for spark. If it sparks then you are good to go. Just wrap the wires up. If it doesn't spark twist them together and check for spark.

 

[Awk08]

Just unplug the key or kill switches to eliminate either. They both complete a curcut When in the off position between the black and blk/white stripe wire, which grounds out the ignition circuit killing power to it.