does anyone.....

[blasty98]

have an older style wiring harness. mine is all messed up. and need a new one.

 

[79 bronco]

Will this work>>>> 02 YAMAHA YFS200 BLASTER WIRING HARNESS | eBay

 

[blasty98]

itll work but i found cheeper

 

[79 bronco]

itll work but i found cheeper

Then get it!!!!

 

[blasty98]

im thinking about it. i just wanted to make sure noone had any laying around, that i could pay for shipping or something. but anymore on here i never get responses.

 

[98blaster+4]

get some wire and make your own.....there may be a diy on here ill check

 

[blasty98]

thatd be greaat. i dont need lights or oil tank or tors. just the coil

 

[blasty98]

thatd be greaat. i dont need lights or oil tank or tors. just the coil

and kill switch

 

[98blaster+4]

sorry bud coudnt find a diy on making your own harness just ones to eliminate wiring thats not needed.
are you any good at soldering? you could make a diy on it while your making it.

 

[blasty98]

i realyy wouldnt need to solder anything. i got a good stator i just need wires from the cdi and coil to get spark back. i lost spark when i cut my tors out. i think i cliped a wrong wire and now its screwed

 

[1995blaster]

just undo everything u cut and start again

 

[blasty98]

any body know where the undo button is? i cant just start over the wires are cut

 

[1995blaster]

just re connect em and go from there there are such things as wire connectors

 

[blasterracer817]

follow my wire eliminatiom diy. i tell what the wires are. or follow a schematic. if you send wire and plugs to me ill make one for you

 

[blasty98]

i dont have any wires on them i threw them out like the video said that i watched to remove the tors. im just gonna try and rig one up. or buy one