Do i need new rings on my blaster?

2006 blaster

New Member
Feb 11, 2012
128
0
0
Mayville, ND
I have a 2006 yamaha blaster and it wont start very well. I was wondering if i should put new rings in it or put a bigger jug and everything all the way to 250cc.
 
first of all do a compression test on it to see where the compression is.


to get a true 250cc out of a blaster you have to go with a big bore kit, and a stroker crank
 
Check compression. If that's good then check that the inside of your carb is clean and that the air filter is clean. Take a close look at your reeds to. Also try a new plug after you do the compression check if it reads good.