im sure most of us have needed to take the valve stem needles outt o put slime in tires... well i couldnt find any of the ones i had so i got crafty and maid my own...
granted this isnt blaster parts but it does make life easyer
ya know them plastic nozzles that come with rtv tubes?? cut off just enough to get it into the hole.... than take a grinder or demal with a thin cut off wheel and make a slit in the end just deep enough to slide over the sides of the stem needle... whaaallaaaaa!!!! home made valve stem tool
this can also be done with 3 16th brake line... same concept make a slit in the end and you now have a home made tool!
id post apicture but my camera being a pos
granted this isnt blaster parts but it does make life easyer
ya know them plastic nozzles that come with rtv tubes?? cut off just enough to get it into the hole.... than take a grinder or demal with a thin cut off wheel and make a slit in the end just deep enough to slide over the sides of the stem needle... whaaallaaaaa!!!! home made valve stem tool
this can also be done with 3 16th brake line... same concept make a slit in the end and you now have a home made tool!
id post apicture but my camera being a pos
