Dies on takeoff

[Disaster]

Hi I just got my 2000 blaster for 300$ did work to it rode it all day yesterday. Today I started it warmed it up and put it into first and on the take off it jumps and dies right away. Carb was cleaned everything seems fine. Could it be running out of fuel or other problems, thanks sounds dumb but I have no idea

 

[gizzy2014]

how bad does it jump??

 

[Disaster]

Just alittle bit

 

[Herpderplol]

Tighten the clutch cable.

If it jumps right when you put it in gear, you need to adjust the clutch itself or the cable

 

[DUALSTROKE]

Sounds like the clutch is locked up. Plates are most likely stuck to the hub or plate. Drain the oil,take the clutch cover off and have a look at what the clutches pressure plate does when the clutch is applied.
And for once no needed

 

[Disaster]

Ok I'll try the cable thing first if that doesn't work I'll check the plates
Thanks

 

[Blaaster]

Again I am being a parrot, but have you leak tested it yet,

 

[Disaster]

What is that I'm very new to this and I took the cover off and they are sticking now what?

 

[Blaaster]

Are there any grooves worn into the basket fingers?

 

[Disaster]

Fixed it I think I'll try when I get new oil the plates don't seem to be sticking anymore thanks for the help

 

[Quadman1]

Its defiantly a clutch problem. Is the ball bearing in it?

 

[Disaster]

Yea ball bearing is there.

 

[Disaster]

Anyththing ? I'm lost here