Died, wont restart... please help

[Norris406]

around 30 psi.... after like 10 kicks

 

[johnsonsf8878]

I am having a very similar issue and I am curious on if you figured out the issue?

 

[stephen12091985]

so.... flywheel key hasnt sheared completly, but has started to... so I replaced it. But, the problem is definatly compression... so thanx 2strokepower. Im still bumfuzzled as to why it would just loose compression like that and die. So... rings fryed maybe? Havent found and leaks around head gasket... or any air leaks anywhere. Reeds are new.... Any other common cause for quick loss of compression?

did you do a leakdown test to see if it had airleaks or how do you know?

 

[stephen12091985]

there should be a cause of why the topend went

 

[fioz600r]

You have 30 PSI compression. Then it is time for a rebuild bro. Take it apart and see how the cylinder looks.

Dont take this the wrong way, are you sure you did the compression test right? Holding the throttle wide open and then kicking it?

 

[2strokepower]

You have 30 PSI compression. Then it is time for a rebuild bro. Take it apart and see how the cylinder looks.

Dont take this the wrong way, are you sure you did the compression test right? Holding the throttle wide open and then kicking it?

When i checked the compression on my blaster i didient hold the throttle wide open and i still got 125psi.