Damnit, Can't ride and I just put the Toomey on!

[Blaster200boy]

Well I've had my Toomey for 1 day now. I put a 320 main in and it seemed to run wonderful! Today i took it about 25mns around the 3mile circle around our town and coming up on about the 3rd mile the blaster started slowing down and i was giving it gas about 1/4 throttle.. I had my grandpa come take me back to the house and i checked for spark. It had really good spark. So i know its not the electrical. I took the carb off went through it. Nothing was loose in there. took out my reed cage and all the reeds were fine....

What else could this be???

Anything else that you wanna know, just ask...

 

[1997blaster]

so it just died? did u try restarting it? mabe u fowled a plug?

 

[1997blaster]

did u check and see if u had gas?

 

[Blaster200boy]

so it just died? did u try restarting it? mabe u fowled a plug?

1.5 gallons of gas was in the tank. Has a beautiful spark. So could it truly be the plug?

 

[1997blaster]

is gas coming out of the hose if u take if off the carb? if u have a new plug u could try it. is the plug black and oily

 

[Blaster200boy]

is gas coming out of the hose if u take if off the carb? if u have a new plug u could try it. is the plug black and oily

Yep, gas is flowing easily with no hassle. Yes, plug is black and has fluid (gas) on it.

 

[1997blaster]

Yep, gas is flowing easily with no hassle. Yes, plug is black and has fluid (gas) on it.

if you have a torch put the plug in a vice or in some plyers and get the ground strap red hot then let it cool and put in back in

 

[03blasteryfs03]

^^ i wouldnt get it to hot i did that to a couple of race bikes and the damn things break off its a sob to fix lol i would throw in a new plug and dial in the jettting the needle and main if needed

 

[Blaster200boy]

Guys, its the top end. I had a friend help me pull the top end off and the rings are seized to the piston. The piston also has scarring and the cylinder needs bored. I would get some pics but i dont have my camera adapter to my computer.....

 

[callmej75]

Ouch....maybe the oil injection system failed or forgot to hook the hose up for the oil injection?

 

[InfamousBlaster]

daaamn son!.. time 4 a new WISECO!!!

 

[InfamousBlaster]

and some oil.. lol

 

[Blaster200boy]

Ouch....maybe the oil injection system failed or forgot to hook the hose up for the oil injection?

Its blocked off....I ran 50:1 when i got it outta the shop last time. I learned my lesson.... and the guy who did it....told me to break it in the wrong way. Dumb me....

 

[Blaster200boy]

daaamn son!.. time 4 a new WISECO!!!

You got that right!

 

[callmej75]

Ahh....well then may as well do it right....get a LA Sleeve and go for the 240!

 

[Blaster200boy]

Ahh....well then may as well do it right....get a LA Sleeve and go for the 240!

I still have quite a bit of bore left. when i get to the end of it, i will get the Airsal/Factory 7 big bore!!!

 

[callmej75]

There ya go...good stuff

 

[Blasterdude27]

I still have quite a bit of bore left. when i get to the end of it, i will get the Airsal/Factory 7 big bore!!!

I gotta agree! While its apart throw in a stroker.. I'm kicking myself for not doing it over the summer when my top end went.

 

[justtwistit]

man when u just got to open her up she quits on u that has to suck!
well i guess now u get to rebuild ur top end and have a little fun
u might as well save up and send it to flotek , wildcard, or kenndy to get it ported while u have it a part

 

[Blaster200boy]

I gotta agree! While its apart throw in a stroker.. I'm kicking myself for not doing it over the summer when my top end went.

Dude, I spent over $1000 to replace the bottom. I had myu mechanic do that. I'll get a stroker prolly when this top end goes out.