CTB02s' build

[CTB02]

This is my first build so bear with me. I am going to start work on it monday. First thing im doing is pulling the motor, removing the front fender mounts,removing the rust from the frame. I am going to be getting a new piston kit, exhaust system,and some different plastics, a 400ex rear shock, and a banshee axle.

 

[Blaaster]

Keep us up to speed with the build, and remember the pics.

 

[CTB02]

I wont forget the pics, lol

 

[doodleaddict]

pics!!! lol what's the plans?

 

[CTB02]

@ doodleaddict I am going to be getting a new piston kit, exhaust system,and some different plastics, a 400ex rear shock, hydraulic brakes, and a banshee axle. Thats the plans so far.

 

[CTB02]

Well I went outside today and took off the rear fenders, im rethinking about removing the front fenders. Also I have to see if the oil injection pump was removed the tank is not on the bike. The rear brake light is gone and the wires were cut too. If I remove the rest of the wires from the brake light will it affect the headlight? I will start to post pics tomorrow nite.

 

[CTB02]

These two wires were twisted together by the handlebars. Any idea why? Were these for a ignition?

 

[CTB02]

I removed the oil injection wires and the tors system along with the rear brake light wires.

 

[CTB02]

Here are the plans for paint.
The plastics control arms and swingarm will be blue.
The frame, and hubs will be white.
I am going to tear it down tomorrow and start prepping.