cr80 carb on blaster?

[00blaster00]

hey, i have both a cr 80 and a blaster. My blaster needs a carb and the cr80 needs a lot more. I was wondering if i could use the cr80 carb on the blaster and if so what do i need to put it on

 

[Blasterdude27]

I belive depending on the year they are the same size... not woth it you won't get any gain from it.

 

[1997blaster]

I belive depending on the year they are the same size... not woth it you won't get any gain from it.

he said he needs a carb. if u do it you HAVE to jet it

 

[Blasterdude27]

he said he needs a carb. if u do it you HAVE to jet it

lmao I didn't even see that.

Your right though jetting would be a pain in the ass.

 

[00blaster00]

he said he needs a carb. if u do it you HAVE to jet it

okay. now i have no clue about different jettings do u know what size i would have to go to?

 

[Blaster200boy]

okay. now i have no clue about different jettings do u know what size i would have to go to?

Tell us your mods done to your blaster.....

 

[1997blaster]

find out what sixe the carb is and what kind it is

 

[00blaster00]

Tell us your mods done to your blaster.....

all i have is a fmf exhaust and a k&n filter, also its a 28mm carb i believe

 

[stephen12091985]

yea there the same size 26mm

 

[2strokepower]

yea there the same size 26mm

no cr80 carbs are bigger .

 

[92blaster]

cr 80 carbs fit just fine in the intake boot my friend is putting one on his off my 89 its a 28 keihin and you need a reed spacer to clear the clutch arm and need to hack up the airbox or put on a clamp on filter...