completely remove tors

[militaryblaster]

Is there a way to completely remove the T.O.R.S. from the Blaster without buying a new carb? Is there a company that makes a cap for the stock carb or anything? thanks

would this work

http://www.denniskirk.com/jsp/produ...&productId=p172564&leafCatId=11101&mmyId=6846

 

[djack12]

yes there is. you need to buy this kit from vitos.

http://cgi.ebay.com/ebaymotors/Blas...801891QQptZMotorsQ5fATVQ5fPartsQ5fAccessories

 

[militaryblaster]

thanks

 

[djack12]

that cap you posted would not work, because you have to install a new idle screw.

 

[Mrbrocco]

umm i removed mine without a kit..?

 

[djack12]

ummm how do you adjust the idle?

 

[skoobyj]

idle?
You mean to tell me these things are supposed to idle!?!
=))=))=))=))=))=))=))=))=))=))

 

[daniel3877]

lol...I love this forum !!! so how did ya adjust the idle?????

 

[GERMAN_WARRIOR]

start with an adjuster cable screw at the thumb throttle
then go to carb
works for me. i turn it a lil cold and let it run and once im to the trails it warmd and can trun it back.:-D

 

[newnick]

Both of those kits come with the drillbit and tap and new idle screw.
I've used the vito's one and it works fine.

 

[coreyownz]

yea i used vitos elimator came with everything