cleaned carb

[roadglide65]

i have a 2000 blaster that hasn't been ridden for almost 2 years.Can;t get it to start. Pulled carb and it was varnished up pretty bad. tORE IT COMPLETLY APART AND CLEANED ALL JETS AND PASSAGEWAYS-FLOAT BOWL-FLOATS LOOK GOOD. pUT IT BACK TO GETHER AND NOT GETTING GAS TO CARB. hAVE IT AT FUEL LINE WHEN I DISCONNECT FROM CARB BUT FLOAT BOWL NOT FILLING UP. Repeated clean up again and blew carb out with air pressure. Still not getting gas in carb. Is this a jet plugged or what? Help! trying to get it running for grandkids.

 

[joeak47]

You need to set your float height!
20mm -21mm. Do NOT include the carb bowl gasket in the float height measurement.

This will help... \/ \/ \/
http://www.blasterforum.com/threads/float-heights-and-how-to-adjust-them.50565/

 

[joeak47]

You can do this!