CARB QUESTIONS...need answers asap

[Stryder917]

ok..i never bothered with my carb on my blaster b4, and i always take my carb on my banshee to a shop..so i need some answers...

What is the Bigger screw on the carb itsself (the piece that you can take off)
What is the Smaller screw on the piece that the carb goes into?
how do i adjust it to be more lean/ less lean?



AND YOU GUYS THAT ANSWERED MY QUESTIONS ABOUT THE "NEED HELP NOW", I FIGURED OUT THAT EVERYTHING IS FINE..I HAVE TO READJUST MY CARB SINCE I HAD IT JETTED. NOW I NEED HELP VERY BAD LOL

 

[Cochise]

the big screw on the T.O.R.S. is an idle screw, i would assume the little screw you speak of is the air/fuel screw, in is lean, out is rich, best thing to do is sink it until the quad almost dies and go in 1/4 turn increments until its "level" again, or smooths out persay

 

[Stryder917]

thanks, that is a big help