Is there a difference in brand on carb rebuild kits? Is the 15 dollar one in eBay the same as another? Wanted to find this out before I ordered
Carb kit brand?
- Thread starter Maniacmotomouth
- Start date
Alright that's what I figured. I have rebuilt carbs before but they have all been on old boat motors that are super super simple. The blaster carb from what I can tell is ALOT more complicated so I am gonna tear it apart after deer camp(so I can make sure that I am not going to royally screw up and not have the thing running) and see what happens.
The stock Blaster carb is a pretty simple device, the only thing you can get wrong is an incorrect float level.
Good to know! I ordered the kit last night so hopefully Monday night I will be on my porch rebuilding the thing. Man alive I hope that it fixes my bogging issue at low RPMS and its not something more complicated.
here's some homework to do before your carb kit comes
how i do it, in this order....
it must be leak free before any jetting can be done:
http://www.blasterforum.com/do-yourself-20/build-use-leakdown-tester-10663/
clean/rebuild carb:
http://www.blasterforum.com/carburetor-138/how-clean-your-carb-pics-209/
check/set floats:
http://www.blasterforum.com/carburetor-138/float-heights-how-adjust-them-50565/
adjust airscrew/pilot jet:
http://www.blasterforum.com/carburetor-138/adjusting-your-airscrew-pilot-jet-51060/
needle on the middle clip for 90% of blasters using the stock carb.
plug chop main jets:
http://www.blasterforum.com/carburetor-138/how-plug-chop-53237/
OK, so im officially back from deer camp with three packages worth of parts on my front porch....HOWEVER, I just pulled the carb kit out and it say 1988-1995. My wheeler is a 2001. I was wondering if there is any differences in the rebuild kit between 95 and 01. The rebuild kit on ebay said 89-02
Oh man what a relief. I was wanting to get the thing rebuilt before we go back this weekend. Thanks as always for the info!
Similar threads
