Carb jetting?

[DAugust84]

I have 230 Jet in my stock 26mm mikuni, i just got a oko 30mm carb. What you be a good starting point for me? The new carb takes kiehin jets.

 

[Awk08]

look thru this thread and see if anyone has posted a 30mm OKO and what jets they used.

http://www.blasterforum.com/threads/what-jets-are-you-using.28981/

 

[Larry's Shee]

Why the carb change?
Any mods you're not telling us about?

 

[DAugust84]

No, my stock carb is cracked so i figured i would get a little bit bigger one just in case i do some more mods in the near future.

 

[Larry's Shee]

Very roughly Kehine mains are 1/2 and pilots are 2x a Mikuni number. Check that thread see if you can find similar set up. Always start big and work down, using plug chop.
More than likely you won't be very happy with it on stock setup. Gives good excuse to mod it!

 

[DAugust84]

Very roughly Kehine mains are 1/2 and pilots are 2x a Mikuni number. Check that thread see if you can find similar set up. Always start big and work down, using plug chop.
More than likely you won't be very happy with it on stock setup. Gives good excuse to mod it!

Would it be worse than my stock carb performance wise right now

 

[Larry's Shee]

Might be boggy in the lower rpm.