Carb issue????

[bobdryerr]

Ok when i turn on my pecock the bowl in the carb over flows an just pours my fuel onto the ground. its never done this before an i took apart the carb an the float aint stuck at all. i cant fgure it out. im suppose to go on a big ride this saterday but if i cant figure it out i wont be going. thatll suck since i havent been riding in 2 months since i broke my ankle. any help would be awsome.

bob

 

[stephen12091985]

check ur float level

 

[xmous3yx]

u tried knocking the side of ur carb while the gas was flowing out?

 

[L.T.]

your floats aint right or your float needle is worn (get a new one)

this might also help

Is your two-stroke running rich? Read here. - ThumperTalk

 

[bobdryerr]

i do notice that it is smoking alot more and it is a lil more boggy off the line when i get off work to day im gonna dig into it more. if i remmber right the spring on the float is like really bouncy like u can shake it an it just bounches up an down like crazy. do you think it could be just that spring or should i just replace it all. i have 2 extra carbs off my banshee sitting around do you guys think i could maybe rob the parts from that or will it b diff from the blasters.

 

[bobdryerr]

oh yea sorry for being a dick i forgot to tell everyone thanks for the help so far. like i said ill find out more tonight when i get off work.

so thanks everyone so far

 

[Awk08]

refer to here to see what i found, and my float was also out of spec. (20 -21.5mm to the top, from the bowl gasket), prolly from a hard hit i took on a big double i cased it on, .........................

http://www.blasterforum.com/engine-13/fixed-my-bogging-problems-17820/

oh yeah, if this helps ya, how bout some pics in a red bra, hahahaa

 

[bobdryerr]

Yea I broke my ankle cause my friend said he cleared us a path through the weeds. Well I was crusen along an hit a stop an my blaster went stragiht up in the air an bent my anckle backwards an snapped it. Before I knew it was broke I managed to get back up an kick start it with a broken ankle. Since then tho it started the fuel leak

 

[CHutzell]

your float is stuck

 

[Awk08]

see a hard hit started this, gotta be your float level, 20 - 21.5mm measured to the top of float from the bowl gasket, with the carb resting upside down on the bench

 

[bobdryerr]

ok so if that is the problem how do i fix it ???? i got it apart right now.

 

[bobdryerr]

ok its fixed now. it was off a little then i adjusted it the wrong way an it started to just pour out. so then i adjusted it the other way an wala. its fixed an running better now.

thanks evetryone for ur help

bob