I have a bored 68mm with a k and n and no lid and v-force reeds. But I am going to do the exhaust and aluminum airbox. also my spare jug will be ported and not sure if Ill have it sleeved for the 240 or bored for the next size and just boost some compression on my spare head shaved .020.
I was wondering if you guys ran a 34mm Mikuni on a nearly stock motor with pipes and a filter
I am also considering a 32mm
I can jet them pretty good but not sure if tuning a 34mm to the motor with just bolt on and no porting will be possible
Please give any and all advice available.
I thought my buddy had a 34mm on a 240 kit but he says its a 33 mikuni but i dont think they make one.
I was wondering if you guys ran a 34mm Mikuni on a nearly stock motor with pipes and a filter
I am also considering a 32mm
I can jet them pretty good but not sure if tuning a 34mm to the motor with just bolt on and no porting will be possible
Please give any and all advice available.
I thought my buddy had a 34mm on a 240 kit but he says its a 33 mikuni but i dont think they make one.
