cant get it to idle

[515 Beau]

i have just rebult the bottom end and top put a stroker crankshaft 4 mm in it but i cant get it to idle the idle screw doesnt do anything cleaned the carb jetted it everything. It runs get its just you cant walk away or it will die. even when Im riding trails and you dont keep idle it just will die. It did it before i had all the motor work done. i have also replaced the the throttle cable thinking it was it. took off my headlight thought the cable was pinched and that did help for a little bit but its back to its old ways PLEASE HELP THANK YOU

 

[dirtyblaster]

jets are too small or big, check your plug

 

[515 Beau]

did that, its not the jets. could it be my tors

 

[flyers42091]

Yeah it might be the tors. Take it off and go from there.

 

[oscaryu1]

Check your flywheel key, make sure timing is right, and that the plugs are properly gapped...

 

[randelator]

its the pilot jet thats for sure its too fat!!!