camber on 2002

[dlporkchop]

I have three blasters, 2 2002's & a2003 & a 2004 frame. I bought one of the 2002's about a month ago. The left tire camber(plumb) is way out. I have replaced the upper & lower arms,shock,tie rod,spindle from my 2004 frame. The camber is still way out. The only thing I haven't done is to use my other 2002 front suspension which is staight.Frame problem? I don't think the 2004 & 2002 suspensions are bent exactly the same if that is the problem? Help!!!!! Porkchop For the sake of it I also replaced the spindle today with my 2004 blaster. The tire spins true with no wobble with both spindles & there is no defects as far as inspection goes?

 

['blanshee'man]

i would have a look at the spindle, possibly all bent outta shape

 

[blasterfreek30]

yup sounds like a bent spindle

 

[Awk08]

i would say bent spindle too, but sounds like he try'd a few different ones, stand it up on its ass and have a look where the frame starts to widen, it's a known weak spot, i bent one there before

 

[samolia]

this may sound kind of dumb but do all the tires have the same amount of air in them i had that happen to me and and then i filled it with air and it helped.....kinda dumb i know but it happened to me lol...
but if there is something wrong with the frame you should take a pic of the frame for us when you tip the machine up on the grab bar cause there are alot of people on this site who know just what a blaster frame should look like..