hi, I just bought a blaster frame disassembled and I'm going to try and turn the blaster into an electric ATV. i started to clean the parts to be painted so that i can put everything together. I found that the ball joint on the end of the left a-arm was sheared off. so I found someone selling a new one but they said the angle on the part could be different than the one I have, and that the wheel hub then won't be able to be bolted because the bottom and the top arms will have different angles. I was wondering if this is actually a thing that could happen. the blaster frame I have is a 1988 and he is selling parts for 2000 to 2001. I am not too familiar with blaster frames so I just wanted to double-check.