So my piston broke nd I took off the top nd seen piston broken on the bottom nd the pieces were up top,wat piston is the way to go to get it fixed ,,is it difficult to split the cases if a newbie or should I just have someone who knows mess with it ?
Broken piston need help
- Thread starter 956blaster
- Start date
alot of us like the wiseco forged pistons, but the cast ones (namura, pro-x, vertex, ect. ) will serve you well and are cheaper
engine teardown:
http://www.blasterforum.com/threads/blaster-engine-disassembly-vid.42997/
assembly:
http://www.blasterforum.com/threads/kor-engine-assembly-vids-no-crank-puller-needed.51169/
more than likely, exessive piston to cylinder clearence resulted in piston slap and broke the skirt, time to bore it and go with a bigger piston, this will require a knowledgable shop.
engine teardown:
http://www.blasterforum.com/threads/blaster-engine-disassembly-vid.42997/
assembly:
http://www.blasterforum.com/threads/kor-engine-assembly-vids-no-crank-puller-needed.51169/
more than likely, exessive piston to cylinder clearence resulted in piston slap and broke the skirt, time to bore it and go with a bigger piston, this will require a knowledgable shop.
A Clymers Repair manual or the pdf download on this site will help also.
Hope you cleaned it well before you started taking it apart
Hope you cleaned it well before you started taking it apart
Similar threads
