So last week im taking apart my clutch and trying to get the hub off. I tried made a clutch holder tool, and threaded the bolts from my tool into the clutch hub like where the clutch springs would go. Well, the hub snapped where the bolt threaded in so I drilled a hole into the hub and stuck an allen key in through it and the clutch basket and put a penny in the gears to keep it from turning. I got it off, but still have yet to get a new one. I really want to go riding this weekend so ill probably just slap it toghter as-is. Do you guys think it will still work for the time being? I mean there are still 4 other clutch springs and i sanded the hole i drilled down so the plates could slide over.