break in process
- Thread starter powerband
- Start date
what he said...
3-4 heat cycles... let it idle for 10-15 min.. let cool for 30-45 mine, after 1st or second cycle let it cool and check your head bolts.
after that.. ride it... start out idle to 1/4 throttle.. varrying the throttle dont hold it at one set throttle limit..... let it cool than half throttle.. let it cool 3/4 let it cool full.. allways vary the throttle
3-4 heat cycles... let it idle for 10-15 min.. let cool for 30-45 mine, after 1st or second cycle let it cool and check your head bolts.
after that.. ride it... start out idle to 1/4 throttle.. varrying the throttle dont hold it at one set throttle limit..... let it cool than half throttle.. let it cool 3/4 let it cool full.. allways vary the throttle
don't forget to check the base nuts!!! i didn't check mine and they loosened and blew the gasket, now i have to tear it back down
GREAT POINT
Always check base nuts and head nuts 3 times after break-in
They will loosen up
