Bottom end locked up?

[sapient]

Ive been super busy the past few weeks so I havent started my blaster in about a month or 2...

So I finally got out and cranked it up this past weekend, rode it around the yard a few times and then it slowly killed... I thought I might have ran out of gas, so I checked the tank, put the switch on reserve and tried to kick it over...

The kick start DOESNT MOVE AT ALL... its jammed completely. Is there something else I can do to try and figure the problem out without cracking the case?

I can put it in neutral and roll it, sounds like it goes in gear and everything, but it just wont crank... Now that i think about it, its probably the piston locked up huh? I'll check it when I have the time, im not too worried about it though since im supposed to be getting my banshee parts soon, right ANGUS????

 

[blaster007]

If its seized you can try putting it in like 2nd or 3rd and rocking it back an forth. Might be enough to get the rings unstuck.

 

[royalt67]

If you do get it unstuck, ya better check the compression. I would wonder why it seized and check it out.

 

[brandoz28]

i'd be pulling the head off and taking a look at the cylinder to check for scarring