I put new reeds in my blaster to solve bogging problems, etc. etc. But a problem I had with the stock reeds is back. It starts fine, but idles oddly unless the choke is barely out and when I pull the clutch in, it wants to stall. Should I just turn the idle up? And it didn't do this yesterday.
Blasters starting its **** again.
- Thread starter GrungeGod494
- Start date
It doesnt have the reed stops, the reeds I got have their own stops, so the stock ones werent nessicary.
what brand reeds did you get that came with stops? the ones in your sig? were they new used? that small metal strip at the top is for strength it's not a reed stop.
i have a 98 blaster new to the two strokes it keeps fouling the plug so i bought an ngk b8es plug it started right up...ran insane for a few days then started its crap...it started boggin and backfiring while riding and it died and wouldnt start back up the after about 50 times it started but acted like it was getn to much gas and fouled that plug too....it smells like its running rich and when it finally does start it acts like its flooded and backfires and dies and wont start back up someone plz help me before i break down and sell it..i dont want to but i dont know anything about how to work on them and dont have the money for someone to work on it////so if anyone could help me work on it myself i would appreciate it...oh and it mixes the gas and oil itsself oh and it has a mikuni carb
Yes the ones in my sig, but I don't get it, it was running beautifully before this.
