blaster wont start

[jersey2000]

i have put a new coil, rebuilt the carb, replaced the oil seals, and new stator an my blaster still wont start. i kick it over and over and it starts for 2 seconds but then shuts off. any one know what the problem could be ?

 

[Herpderplol]

Check your reed pedals

 

[blasterfied]

When you rebuilt the carb, did you replace the pilot jet? Is the tors still in use or deleted?

 

[MrTwoJay]

I suspect a fuel problem, check carb gets fuel, check carb, airscrew 1.5t out.
If it was running before but not after doing seals and carb, check carb and for airleak.

Btw, did you do a leak test after replacing the seals? Could be a rolled seal lip or a major air leak too.

 

[harley1-5]

also check to see if fuel petcock[on off lever]is flowing freely