Blaster won't start

[Hondasolboy]

So I recently bought a blaster. I had one about ten years ago and loved it. When I first got it it ran, not good but it ran. So last week went to ride and couldn't get it to start. I took carburetor off and cleaned, removed tors, new plug and coil, new gas and oil, new filter. Still nothing, somebody please help..

 

[Hondasolboy]

Anybody? Lil help please

 

[tbrooks]

First and foremost do a leak test and compression test. Did you look at the reeds when you had the carb off?

 

[Hondasolboy]

Reeds where fine

 

[tbrooks]

There's a sticky at the top of the engine section on air leaks and testing. I don't know how to post a link or i would. Its very important tho!

 

[tbrooks]

Maybe I figured it out... http://www.blasterforum.com/engine-13/all-about-airleaks-55537/

 

[Hondasolboy]

No leaks, good compression. New cdi, still won't start.please help

 

[tbrooks]

Have you checked the float level. Sounds like you did the work to make sure you got spark, maybe your not getting enough fuel

 

[Hondasolboy]

Pulled plug and it's wet, don't know if that means im getting enough gas or not.

 

[Goatwrangler]

I would think a wet plug means youre getting enough fuel.

 

[harley1-5]

have you checked your spark have you checked flywheel key?