Blaster starting problem

Discussion in 'Engine' started by Steve daly, Nov 21, 2020 at 10:32 AM.

  1. Steve daly

    Steve daly New Member

    Joined:
    Saturday
    Messages:
    1
    Likes Received:
    1
    Trophy Points:
    1
    Gender:
    Male
    My blaster woulnt start for me awhile ago . I got a new plug in it and it started first kick. I havent been on it in over a month tried to start it today and wouldnt start. Im going to get a new plug again to see, i took the old one out and cleaned it today but no joy. Surely there something else wrong ??? Any help greatly appreciated thanks
     
    Awk08 likes this.
  2. Awk08

    Awk08 Administrator Staff Member Technician

    Joined:
    Jan 30, 2009
    Messages:
    24,312
    Likes Received:
    2,230
    Trophy Points:
    175
    Occupation:
    Electrician/Contractor
    Location:
    Pa.
    B8ES plugs ?

    Fouling plugs is mainly limited to rich jetting or weak spark
    if you didn't change any jetting, the only thing that could cause it to gain richness is a dirty air filter or clogged pipe (mouse nests happen)

    easiest way to start diagnosing weak spark is to change the plug boot, auto stores sale a screw on NGK plug boot for under $10, cut about 1/2" of the plug wire off and screw the new boot on.
    check for tight, clean, bare metal connection of the solid black wire ignition ground at the coil bolt
     

Share This Page