blaster runnin problem

97blast

New Member
Nov 13, 2010
86
4
0
king nc
97 blaster... ran fine all week rode it everyday

cranked it this morning ran on choke for a few mins....

then stalled/died... now it wont crank back .. i have spark,comppression,and fuel flows throu the petcock fine... carb bowl is clean ... just cleaned the carb a week ago. kicks over fine just doesnt fire up ???...

help me?!
 
could be a tors problem, many will disconnect it anyway. also be sure the carb jets are clean and float level is right but first i would check compression...
 
stator or maybe air leak...a leak test is called for! don't try to make it run, find the problem or u will make the problem worse...keep us posted.
 
I'm not an expert but It kind of sounds like the same thing I just went through. If all else fails check the flywheel key. Mine split it two, you'll still have spark but your timing will be off. Good luck.