Blaster Rear Wheel Bearings? How do you fit them?

[Blaster200UK]

How do you fit yamaha wheel bearings?
with pictures if possible

 

[Drifz1]

the only bearings in the rear are axel carrier bearings,no wheel barings

 

[Blaster200UK]

ok thanks for that info,
so how do you change carrier bearings?
i have play in the rear wheels, up and down movement, aswell as side to side movement

 

[4cfed]

ijn the wheels or the axle is moving??

 

[Blaster200UK]

the axle has loads of play in it

 

[4cfed]

you need new axle carrier bearings, can be bought fairly cheap off ebay, i personally recommend all balls racing bearings, thats what i have in my 200x

 

[Blaster200UK]

how hard are they to fit?

 

[Drifz1]

easy enough, take your back wheels of ,then loosen your lug nuts(the two big bolts on the axel) then your back sprocket and lrft hub slide the axel out and opo the old bearings out ,then put your new ones in and put it all back together

 

[GIXER7502006]

Any thing we should be looking for on the axle or carrier it's self, i noticed last night when checking my wheels that my axle has up and down movement, not so much on the side to side tho . One of the reasons i was checking it, is on hard accelleration sometimes the bike lunges to the left hard

 

[toytech]

Any thing we should be looking for on the axle or carrier it's self, i noticed last night when checking my wheels that my axle has up and down movement, not so much on the side to side tho . One of the reasons i was checking it, is on hard accelleration sometimes the bike lunges to the left hard

also check your swingarm pivot bearings